POLIR PATES No. 130 for hard wood and hard metals.

A PATE Bread TO POLIR GUBOSA No. 130 for wood.

This GUBOSA grey-green polishing bread No. 130 for wood consists of pumice, a natural mineral abrasive of volcanic origin consisting mainly of silica, and alumina, in a balanced mixture of vegetable and mineral fats and waxes. Its use is recommended for the polishing of wood and, thanks to its high cut, for the matt polishing of hard metals such as steel or iron.

A very good PATE TO POLY for ferrous metals and wood.

The cutting qualities of GUBOSA polishing breads No. 130 grey-green for wood allow a satin polishing on hard metals. The combination of pumice and vegetable or mineral fats and waxes gives a half-dry bread of GUBOSA paste No 130 for wood that is particularly efficient for polishing all wood species without excessive heating.

For use with cotton, sisal or felt polishing discs.

GUBOSA POLIR PATES No. 130 for wood can be used in impregnation on a cotton, sisal or felt disc. Used on compact discs, we obtain polishing with a lot of cutting. The impregnation of the discs is done very simply by applying directly the GUBOSA No. 130 polishing paste for wood on the rotating disc in order to melt slightly the paste which is evenly distributed. The GUBOSA No. 130 polishing paste for wood is of high efficiency and low consumption, thus limiting the impregnation of the discs for a real economy while remaining perfectly efficient.

A balanced mixture of pumice and waxes and vegetable and mineral fats.

These GUBOSA POLIR PATE breads No. 130 for wood consist of a mixture of natural pumice and alumina oxide with vegetable and mineral fats and waxes.

No animal components are included in the composition of these GUBOSA polishing breads No 130, in accordance with the general health directives governing the manufacture of medical and surgical instruments.

© Copyright 3801 - Total or partial reproduction prohibited without authorisation by EUROTECHNI S.A.S.