ABRASIVE BANDS 3M Cubitron II 984F rigid.

Cubitron II 3MTM 984F high-tech ABRASIVE BANDES.

The abrasive bands CubitronTM II are derived from the continuous search for innovations by 3MTM laboratories for ever more efficient functional gains.

With an abrasive consisting of ceramic grains of aluminum oxide triangular profiles in closed powdering, calibrated and oriented by electrostatic process, the cutting speed is exceptional and the heating of the material worked considerably reduced.

Performance, productivity and quality of the result are on track.

A revolutionary technology.

Ceramic abrasive grains of uniform size and precise shape aluminium oxide are perfectly calibrated for a homogeneous state on the toughest metal surfaces.

Triangle profiles and electrostatically oriented towards the front, ceramic grains offer a clean, clean and clean cut, unlike conventional abrasives that operate by grubbing and removing material.

During use, the grain fragmentes and continuously exhibits sharp edges, allowing a cold operating temperature that reduces the risk of heat discolouration and stress cracks and increases the cutting speed in a very significant way.

Increased productivity and reduced operator fatigue.

Thanks to their exceptional qualities, the Cubitron II 3MTM ABRASIVE BANDES are used with medium to high working pressure, significantly reducing operator fatigue while ensuring increased productivity.

These exceptional qualities provide the CubitronTM II 3MTM ABRASIVE Ceramic BANDES with a lifetime of up to four times greater than traditional ceramic grain strips while maintaining their power and cutting speed.

A very robust Y (X rigid) support in polyester canvas.

Composed of a closed powdered aluminium oxide ceramic abrasive fixed by a high-performance resin on a robust rigid polyester canvas support, the CubitronTM ABRASIVE Ceramic BANDES are assembled with a high-strength Film-Lok seal and can be used in both dry and wet environments.

CubitronTM II 3MTM ABRASIVE BANDES for the treatment of the toughest metals.

The CubitronTM II 3MTM ceramic abrasive strips are most often used by cutlery manufacturers on medium or high pressure backstands for the treatment of the toughest metals.

From grinding weld joints to the most perfect finish of metal surfaces, these strips will also allow cutlers to make balanced and homogeneous struts of their knife blades by avoiding the risk of excessive heating of the finest parts thanks to their cutting quality and cold operating temperature.

Hardest materials such as stainless steel, carbon or cobalt-chrome can be easily treated with a perfect result.

© Copyright 3801 - Total or partial reproduction prohibited without permission of SPAP SOUCILLE.